top of page
Sheet piles esc eu series

ESC-EU Series

Cold Formed Sheet Piles

A wide profile pile utilising a robust ball joint clutch, the ESC-EU Series is efficient in terms of weight and installation costs. Suitable for temporary and permanent works. The profile is especially effective in marine conditions where strength and installation efficiency as premium considerations.

The advantages of EU sheet piles include:

  • Clutch provides annular area for effective joint sealing using sealants.

  • Interlocking clutches are located at the outer fibre.This results in an optimized section profile for high strength and low material weight.

  • High Moment of Inertia reducing deflection meeting serviceability requirements

  • Wider profile width reduces handling and installation time with usual driving equipment.

  • Wider profile reduces the number of interlocks required for a set wall run length, improving water-tightness capabilities.

Cold Formed Sheet Piles
NORTH AMERICAN SIZES
Section Modulus Range

​300-8000cm3/m

Width Range (single)

690-1500mm

Thickness Range

​5.75-22mm

Production Standards

​BS EN 10249 Part 1 & 2

​Steel Grades
  • Q235B, Q345B, Q345C, Q390B, Q420B

  • S235, S275JR, S355JR, S355JO

  • ASTM A572 Gr42, Gr50, Gr60

  • Others available on request

Length

14.0m maximum 
Longer lengths can be spliced (>30m possible)
Any project specific length can be produced

Delivery Options
  • Lifting Hole

  • Grip Plate

  • By container (11.8m or less) or Break Bulk

  • Corrosion Protection Coatings

Corner Piles

The slotted pipe clutch can be orientated at any angle allowing almost any corner configuration, without requiring any wastage or additional welding. For internal corners a special piece can be fabricated with little cost due to the flexibility in the cold forming process. Note that the interlocks should be orientated toward the retained side as shown in the following figures.

Technical Information

Technical Information

Product Images

Product Photos

Product Case Studies

Case Studies
bottom of page